Fragen zur LANCOM Systems Routern und Gateways • OSPF über VPN/IKEV2 - 10.90 RC2

Hallo,

ich würde gerne eine OSPF Verbindung über IKEV2 zu fliegen bekommen.
Lt. OSPF ist das IKEV2 Interface down, lt. IPV4-INT ist es up.

Danke und mit vielen Grüßen

Henri

root@GW2:
> sh ipv4-int test
IP-Heap: 5000 (5000)

TEST : Rtg-Tag: 0 VLAN-ID: 0 Peer: TEST
Interface-ID: 53, oper status is up
primary dns: not available
secondary dns: not available

root@GW2:
> sh ospf-nei
Instance OSPF_ROOT, router ID 172.19.1.2 is operating and has areas:
Area (refcount = 0x0 (0) has interfaces:
TEST state: (down) (refcount = 2) has no neighbors
VLAN90_TP state: (backup) IP: 172.19.1.2/255.255.255.0 MTU: 1500 DR: 172.19.1.5 BDR: 172.19.1.2 (refcount = 12) has neighbors:
Router ID Prio State Dead Timer IP Address rtL reqL dbsL
172.19.1.5 100 FULL DR 39.920s 172.19.1.5 0 0 0
172.19.1.12 1 FULL DROther 33.719s 172.19.1.12 0 0 0


---

root@Router:/Setup/Routing-Protocols/OSPF
> sh ipv4-int test
IP-Heap: 5000 (5000)

TEST : Rtg-Tag: 0 VLAN-ID: 0 Peer: TEST
Interface-ID: 19, oper status is up
primary dns: not available
secondary dns: not available

root@Router:/Setup/Routing-Protocols/OSPF
> sh ospf-nei
Instance PRAXIS1, router ID 172.22.0.1 is operating and has areas:
Area (refcount = 6) 0x0 (0) has interfaces:
INTRANET state: (backup) IP: 172.22.0.1/255.255.254.0 MTU: 1500 DR: 172.22.0.2 BDR: 172.22.0.1 (refcount = 6) has neighbors:
Router ID Prio State Dead Timer IP Address rtL reqL dbsL
172.22.0.2 10 FULL DR 33.826s 172.22.0.2 0 0 0

Instance OSPF_ROOT, router ID 172.19.2.1 is operating and has areas:
Area (refcount = 3) 0x0 (0) has interfaces:
TEST state: (down) (refcount = 2) has no neighbors

Statistik: Verfasst von Henri — Gestern, 15:19

---